HERMAtherm top 60 (914)
White thermal paper with protective top and bottom coat (standard top quality)
Technical data
| Grammage | approx. 59 g/m² | ISO 536 |
| Caliper | approx. 63 µm | ISO 534 |
| Tensile strength MD | approx. 45 N/15 mm | DIN 53112 |
| Tensile strength CD | approx. 22 N/15 mm | DIN 53112 |
| Stiffness MD | approx. 100 mN | DIN 53121 |
| Stiffness CD | approx. 50 mN | DIN 53121 |
| Opacity | approx. 86 % | ISO 2471 |
| Imaging colour | black |
Application and use
The surface of HERMAtherm top 60 offers an excellent quality of the imprint with all traditional printing methods. In general, suitability of all printing inks should be tested prior to printing. Web temperature during curing should not exceed 50 °C in order to prevent an early reaction of the thermo reactive ink.
Printing speeds of up to 200 mm/s are possible in thermo direct printing.
HERMAtherm top 60 is Bisphenol-free and can be used wherever thermo reactive labels of smudge proof, solvent and grease resistant paper are required, e.g. for weight labels (meat packers, supermarkets) or for price marking labels (excellent presentation of EAN and UPC codes). Applications on surfaces containing plasticizers are only partially possible. By reason that intensive contact with plasticizers might reduce the sensitivity of the thermo reactive coating and might cause a fading of the printed image, for applications on soft PVC films individual tests are recommended.
Because of the low stiffness HERMAtherm top 60 is in combination with the adhesives 63Z and 63Mps suitable for labelling of surfaces with small radius like syringes and ampoules.
Recommended storage
See HERMA website: www.herma.com/material/storage-conditions/
Regulations concerning contact with food
The thermal paper grade HERMAtherm top 60 (Grade 914) according to the sample material is physiologically and toxicologically safe and may therefore be used in printers and scales for the marking of goods. However, HERMAtherm top 60 may only have direct contact to foodstuffs which are washed and/or peeled before consumption (ISEGA Research and Development Institute, Aschaffenburg).
Disclaimer
All statements, technical information and recommendations regarding HERMA products are given in good faith and are based on tests that we believe to be reliable, but do not constitute a guarantee or warranty. We give no guarantee as to the suitability of the product for a specific application, this should be tested by the user. Unless otherwise agreed in writing, we only accept liability within the scope of our General Terms and Conditions of Delivery and Payment.
HERMA GmbH, Adhesive Material Division, 70791 Filderstadt, Phone +49 (0) 711 7702-0
Demander un échantillon
Il suffit de demander votre échantillon du produit via notre formulaire.
