HERMA PE white (850)
White, glossy, polyethylene film with corona pretreatment
Technical data
Grammage | approx. 77 g/m² | ISO 536 |
Caliper | approx. 78 µm | ISO 534 |
Tensile stress MD | approx. 20 N/mm² | ISO 527 |
Tensile stress CD | approx. 19 N/mm² | ISO 527 |
Surface gloss Angle: 60° to the perpendicular | approx. 70 GU | ISO 2813 |
Opacity | approx. 80 % | ISO 2471 |
Application and use
The glossy surface of HERMA PE white with its corona pretreatment offers an excellent print quality in conventional printing techniques. Before printing we recommend to freshen up the corona pretreatment.
HERMA PE white is perfect for the production of optically pretentious, glossy and opaque labels. For recycling reasons these labels are preferably used on PE surfaces.
Thanks to the high flexibility of this PE film even curved surfaces may be labelled without any problems as well as squeezable packaging.
In combiniton with our UV-acrylic adhesive 62B and 63B the film complies with BS 5609, Section 2 (resistance to seawater) and is thus also suitable for labelling of containers which are transported via sea route.
Recommended storage
See HERMA website: www.herma.com/material/storage-conditions/
Regulations concerning contact with food
HERMA PE white is in compliance with Commission Regulations (EC) no. 1935/2004 and (EU) no. 10/2011 and subsequent amendment 1245/2020/EU on plastic materials and articles intended to come into contact with food and furthermore with the Commission Regulation (EC) no. 2023/ 2006 on good manufacturing practice for materials and articles intended to come into contact with food. The film may come into contact with dry, aqueous, acidic, alcoholic and fatty foodstuffs.
Disclaimer
All statements, technical information and recommendations regarding HERMA products are given in good faith and are based on tests that we believe to be reliable, but do not constitute a guarantee or warranty. We give no guarantee as to the suitability of the product for a specific application, this should be tested by the user. Unless otherwise agreed in writing, we only accept liability within the scope of our General Terms and Conditions of Delivery and Payment.
HERMA GmbH, Adhesive Material Division, 70791 Filderstadt, Phone +49 (0) 711 7702-0
Demander un échantillon
Il suffit de demander votre échantillon du produit via notre formulaire.