Adhesive 63S
Permanent adhesive, acrylic based
Technical data
Tack | very high | |
Peel adhesion | extremely high | |
Shear | very high | |
Minimum application temperature | 0 °C | |
Service temperature | -30 to 80 °C |
Application and use
Adhesive 63S was specially developed to have extremely high tack on various substrates. Because of the high final adhesion 63S is very suitable for long-term identification, for labelling of difficult substrates and non-polar surfaces. This new kind of an adhesive gives on various substrates like PE, PET, aluminium, steel etc. similarly extreme high final adhesion values. Therefore it is suitable with the right face material or security die cutting as a tamper-evident-solution or as a seal for originality. Depending on the substrate the final adhesion will be reached in some cases in 24 hours. The tamper-evident-function is thus influenced by the surface (in folded boxes from the applied varnish) and by design of the substrate, by the design of the label and by the conditions in the end use. 63S has a particularly good resistant against light, heat and aging.
Processing
Because of the high tack and increased coat weight the matrix stripping is recommended to do immediately at/after die cutting.
Storage conditions and shelf life
Storing at a temperature of 20 ± 5 °C, a relative humidity of 45 ± 5 % and a dark storage is recommended. Moisture, heat and direct sunlight have to be avoided.
Regulations concerning contact with food
The pressure-sensitive adhesive 63S can be safely used for the back coating of labels for the labelling of foodstuffs for storage at room temperature and below. It may be used in direct contact with dry and moist non-fatty foodstuffs (Declaration of no objection valid until 12.07.2025).
Furthermore the self-adhesive labels with the adhesive 63S can be used for labelling of blood bags (Expert's Opinion from July 12, 2021).
Disclaimer
All statements, technical information and recommendations regarding HERMA products are given in good faith and are based on tests that we believe to be reliable, but do not constitute a guarantee or warranty. We give no guarantee as to the suitability of the product for a specific application, this should be tested by the user. Unless otherwise agreed in writing, we only accept liability within the scope of our General Terms and Conditions of Delivery and Payment.
HERMA GmbH, Adhesive Material Division, 70791 Filderstadt, Phone +49 (0) 711 7702-0
Demander un échantillon
Il suffit de demander votre échantillon du produit via notre formulaire.