Adhesive 63Mps

Permanent adhesive, acrylic based

Technical data

Tack extremely high  
Peel adhesion very high  
Shear very high  
Minimum application temperature -20 °C  
Service temperature -50 °C to +80 °C  

Product information

Adhesive - Issue 06.2018

PDF download

Application and use

The PSA 63Mps is characterized by an extraordinary high tack. Even on critical surfaces tack level is very high. 63Mps suits therefore outstandingly for high-speed dispensing, also on in cool conditions. In combination with thin face materials it demonstrates very good mandrel-hold and is therefore suitable for labelling of items with small diameter.
Once labelled 63Mps is highly waterproof.


Processing

Excellent die-cutting characteristics on all customary machines.


Storage conditions and shelf life

Storing at a temperature of 20 ± 5 °C, a relative humidity of 45 ± 5 % and a dark storage is recommended. Moisture, heat and direct sunlight have to be avoided.
The shelf life up to 2 years from date of production (belongs to face material).


Regulations concerning contact with food

All ingredients of adhesive 63Mps comply with recommendations BfR XIV or FDA 21 CFR 175.105 (Adhesives).

The adhesive 63Mps according to the sample material submitted may be used safely for the reverse coating of labels for the labelling of foodstuffs for a storage at room temperature and below. It may stand in direct contact with dry, moist and such kind of fatty foodstuffs to which a correction factor of at least 2 can be applied according to the Regulation (EU) No 10/2011.

Furthermore, the adhesive may be used for laminating various materials. In this case, the seams may safely come into direct contact with foodstuffs.
The labels may also be used for the labelling of blood bags. (The certificate of compliance is valid until December 15, 2019).


Disclaimer

All statements, technical information and recommendations regarding HERMA products are given in good faith and are based on tests that we believe to be reliable, but do not constitute a guarantee or warranty. We give no guarantee as to the suitability of the product for a specific application, this should be tested by the user. Unless otherwise agreed in writing, we only accept liability within the scope of our General Terms and Conditions of Delivery and Payment.

HERMA GmbH, Adhesive Material Division, 70791 Filderstadt, Phone +49 (0) 711 7702-0, Fax +49 (0) 711 7702-381