HERMAcopy/laser color (138)
White label paper, particularly suitable for laser printers and copiers
Technical data
Grammage | approx. 90 g/m² | ISO 536 |
Caliper | approx. 96 µm | ISO 534 |
Tensile strength MD | approx. 75 N/15 mm | DIN 53112 |
Tensile strength CD | approx. 50 N/15 mm | DIN 53112 |
Stiffness MD | approx. 315 mN | DIN 53121 |
Stiffness CD | approx. 200 mN | DIN 53121 |
Opacity | approx. 92 % | ISO 2471 |
Application and use
The specially designed surface of the HERMAcopy/laser color offers excellent printability and toner keying with all xerographic printing processes. It has been designed and optimized for colour printers.
The material is of captivating whiteness which is one of the reasons for the outstanding printing results on all usual colour copiers and colour laser printers. Label sheets are suitable for laser printers and copiers which can handle sheets with a weight of more than 135 g/m².
We recommend a production from small reels 217 mm wide or 434 mm wide for two-wide production (original edges of the semi-finished material should not be used). To prevent soiling of the machine we recommend die cutting of the labels with an "all round matrix" or at least with "lengthwise edge protection".
A possible curvature in machine direction (especially near the cores) may be adjusted by a "decurl bar" in the press. Water-based inks may negatively influence stay flat characteristics of the paper. We therefore recommend no use of water-based inks for printing of large areas.
Recommended storage
See HERMA website: www.herma.com/material/storage-conditions/
Regulations concerning contact with food
The paper is approved according to the BfR Recommendation XXXVI. This paper grade according to the sample material submitted may be used safely for food packaging. It may stand in direct contact with dry, non-fatty foodstuffs and such kind of foodstuffs which are peeled, shelled or washed before consumption and may also be used for secondary packaging. (ISEGA Research and Development Institute, Aschaffenburg)
Disclaimer
All statements, technical information and recommendations regarding HERMA products are given in good faith and are based on tests that we believe to be reliable, but do not constitute a guarantee or warranty. We give no guarantee as to the suitability of the product for a specific application, this should be tested by the user. Unless otherwise agreed in writing, we only accept liability within the scope of our General Terms and Conditions of Delivery and Payment.
HERMA GmbH, Adhesive Material Division, 70791 Filderstadt, Phone +49 (0) 711 7702-0
Demander un échantillon
Il suffit de demander votre échantillon du produit via notre formulaire.