HERMAlaser sheet (135)
White label paper with special characteristics for excellent printability on laser printers and copiers, FSC® Mix Credit
Technical data
Grammage | approx. 64 g/m² | ISO 536 |
Caliper | approx. 70 µm | ISO 534 |
Tensile strength MD | approx. 63 N/15 mm | DIN 53112 |
Tensile strength CD | approx. 33 N/15 mm | DIN 53112 |
Stiffness MD | approx. 155 mN | DIN 53121 |
Stiffness CD | approx. 90 mN | DIN 53121 |
Opacity | approx. 87 % | ISO 2471 |
Application and use
The specially developed surface of HERMAlaser sheet offers optimal printability and toner keying with all xerographic printing processes. Label sheets are suitable for large laser printers, desktop laser printers, copiers and a great number of inkjet printers.
We recommend production from narrow reels width 217 mm or width 434 mm for double-width production (original edges of the semi-finished rolls should not be adopted for sheetstock). A possible curl in machine direction (especially towards the cores) may be adjusted by a "decurl bar" in the press. Water based inks may have an adverse influence on the flatness of the sheet stock. We therefore advise against use of water based inks especially when printing large areas. Furthermore the paper is certified with the EU-Ecolabel (EU-Flower).
The pulp for this paper comes from FSC certified forest management and other controlled sources.
Recommended storage
See HERMA website: www.herma.com/material/storage-conditions/
Regulations concerning contact with food
The paper is approved according to the Recommendation XXXVI. This paper grade according to the sample material submitted may be used safely for food packaging. It may stand in direct contact with dry and fatty foodstuffs. (ISEGA Research and Development Institute, Aschaffenburg)
Disclaimer
All statements, technical information and recommendations regarding HERMA products are given in good faith and are based on tests that we believe to be reliable, but do not constitute a guarantee or warranty. We give no guarantee as to the suitability of the product for a specific application, this should be tested by the user. Unless otherwise agreed in writing, we only accept liability within the scope of our General Terms and Conditions of Delivery and Payment.
HERMA GmbH, Adhesive Material Division, 70791 Filderstadt, Phone +49 (0) 711 7702-0
Demander un échantillon
Il suffit de demander votre échantillon du produit via notre formulaire.