HERMAlaser sheet 50 (133)
White label paper with special characteristics for excellent printability on laser printers and copiers, FSC® Mix Credit
Technical data
Grammage | approx. 50 g/m² | ISO 536 |
Caliper | approx. 60 µm | ISO 534 |
Tensile strength MD | approx. 51 N/15 mm | DIN 53112 |
Tensile strength CD | approx. 26 N/15 mm | DIN 53112 |
Stiffness MD | approx. 75 mN | DIN 53121 |
Stiffness CD | approx. 37 mN | DIN 53121 |
Opacity | approx. 82 % | ISO 2471 |
Application and use
The specially developed surface of HERMAlaser sheet 50 offers an excellent printability and toner keying with all xerographic printing processes. Label sheets are suitable for large laser printers, desktop l aser printers, copiers and a great number of inkjet printers.
We recommend a production from small reels 217 mm wide or 434 mm wide for two-wide production (original edges of the semi-finished material should not be used). A possible curvature in machine direction (especially near the cores) may be adjusted by a "decurl bar" in the press. Water-based inks may negatively influence stay flat characteristics of the paper. We therefore recommend no use of water-based inks for printing large areas.
The pulp for this paper is from FSC® certified forests and other controlled sources.
Due to its low stiffness HERMAlaser sheet 50 in combination with the adhesives 62Z is suitable for labelling of surfaces with small radius like syringes and ampoules.
Recommended storage
See HERMA website: www.herma.com/material/storage-conditions/
Regulations concerning contact with food
The paper is approved according to the BfR Recommendation XXXVI. This paper quality according to the sample material submitted may be used safely for food packaging and may stand in direct contact to dry and fatty foodstuffs (ISEGA Research and Development Institute, Aschaffenburg).
Disclaimer
All statements, technical information and recommendations regarding HERMA products are given in good faith and are based on tests that we believe to be reliable, but do not constitute a guarantee or warranty. We give no guarantee as to the suitability of the product for a specific application, this should be tested by the user. Unless otherwise agreed in writing, we only accept liability within the scope of our General Terms and Conditions of Delivery and Payment.
HERMA GmbH, Adhesive Material Division, 70791 Filderstadt, Phone +49 (0) 711 7702-0
Demander un échantillon
Il suffit de demander votre échantillon du produit via notre formulaire.