Adhesive 63Mps

Permanent adhesive, acrylic based

Technical data

Tack extremely high  
Peel adhesion very high  
Shear very high  
Minimum application temperature -20 °C  
Service temperature -40 to 80 °C  

Product information

Adhesive - Issue 12.2023

PDF download

Service Information

Code produit Product largeur utile largeur nette Quantité minimum Branche d'activité et application Épaisseur Grammage Produits stock Délai d'approvisionnement

Application and use

The PSA 63Mps is characterized by an extraordinary high tack. Even on critical surfaces tack level is very high. 63Mps suits therefore outstandingly for high-speed dispensing, also on in cool conditions. In combination with thin face materials it demonstrates very good mandrel-hold and is therefore suitable for labelling of items with small diameter. Once labelled 63Mps is highly waterproof.

Processing

Excellent die-cutting characteristics on all customary machines.

Storage conditions and shelf life

Storing at a temperature of 20 ± 5 °C, a relative humidity of 45 ± 5 % and a dark storage is recommended. Moisture, heat and direct sunlight have to be avoided. The shelf life up to 2 years from date of production (belongs to face material).

Regulations concerning contact with food

All ingredients of adhesive 63Mps comply with recommendation BfR XIV or FDA 21 CFR 175.105 (Adhesives).

The pressure-sensitive adhesive 63Mps can be safely used for the back coating of labels for the labelling of foodstuffs for storage at room temperature and below. It may be used in direct contact with dry, moist and fatty foodstuffs that can be assigned a correction factor of at least 2 in accordance with Regulation (EU) No. 10/2011. Furthermore, the adhesive may be used for laminating various materials. In this case, cut edge contact with food is harmless as far as the above mentioned adhesive is concerned. It must be ensured that the relevant migration limits are complied with by the laminated packaging (Declaration of no objection valid until 14.12.2025).

Furthermore the self-adhesive labels with the adhesive 63Mps can be used for labelling of blood bags (Expert's Opinion from December 16, 2021).

Disclaimer

All statements, technical information and recommendations regarding HERMA products are given in good faith and are based on tests that we believe to be reliable, but do not constitute a guarantee or warranty. We give no guarantee as to the suitability of the product for a specific application, this should be tested by the user. Unless otherwise agreed in writing, we only accept liability within the scope of our General Terms and Conditions of Delivery and Payment.

HERMA GmbH, Adhesive Material Division, 70791 Filderstadt, Phone +49 (0) 711 7702-0

Demander un échantillon

Il suffit de demander votre échantillon du produit via notre formulaire.

Comment pouvons-nous vous soutenir?